Description
The POSITIV'LAB™ is a robust press moulding machine equipped with an integrated vacuum pump and two independent trays.
These two trays can be controlled individually thanks to the two control valves, which allow two orthotic insoles to be produced simultaneously using positive moulding techniques.
This POSITIV'LAB™ unit boasts the following technical characteristics:
- 2 independent trays
- 1 super-powerful integrated vacuum pump
- 1 vacuum chamber to allow for instant membrane aspiration
- 1 tray locking system to maintain optimal pressure
- 1 vacuum pump protected against humidity (water trap) and plaster dust (air filter)
- Easy maintenance with easy access to the water trap and air filter at the back of the machine
- Quick and easy changing system for the latex membrane (2 mm or 1 mm thick)
Technical data
PGLPOSILAB
Data sheet
Complementary Products
CLING FILM used for PU insoles in the field of...
PODI-PRINT™ IMPRINT BOXES
The PODI-PRINT™ IMPRINT BOXES are used for taking...
POLYETHYLENE CASTING BOXES
CASTING BOXES are used in the field of pedorthics...
Customers who bought this product also bought:
TITANIUM WIRE
Titanium wire, 0.12, 0.14 or 0.16, for orthonyxia...
PODIAFLEX® HARD ON FABRIC...
PODIAFLEX® HARD ON FABRIC 1.7mm in black is a...
SPC™ MP 0.8MM BLACK (ROLL)
SPC™ MP 0.8mm in roll form in black is a...
CRIST'AIR® SOFT 3 MM...
CRIST'AIR® SOFT 3 mm in midnight blue is a...
PODIATECH GLUE BY RENIA
The PODIATECH GLUE BY RENIA is a toluene-free...
PODIANE®+ 2MM BLACK
PODIANE®+ 2mm in black is a technical material...
SPORTCOVER 0.8 mm BLUE (ROLL)
SPORTCOVER 0.8 mm roll in blue is a woven...
JOGTENE™ 3MM BLACK
JOGTENE™ 3mm in black is an incontrovertible...